Positive-Stop Vernier Gripper

Original v9 setup calculations and DXF-derived geometry

Grip raw0.000 mm

Closed0.0%

Part

Stock / raw OD, in

Finished OD, in

Setup

Grip scenario

Selection

Primary F/M

Secondary F/M

Result

Engineering

Stroke per side, mm

one finger

Included V angle, deg

included

Fixed holes

Fixed pitch, in

Moving holes

Moving pitch, in

Match tolerance, mm

Displayed candidates

DXF source

DXF fixed pitch

DXF moving pitch

CAD geometry remains fixed when OD values change.
Production stroke window: 2.5 to 22.5 mm.
Back-side rear collision gate: finished OD must be at or above 4.28477292 in; otherwise the gripper backs collide before finished grip.

Grip sideSetupStatusTargetDual

OD Feasibility

Move over the map to inspect a setup.

Engineering parameters changed. Refresh the map before using it as the current feasibility reference.

Production-default map loaded.

Show production 20 mm boundary reference